OxBlood Set - FlexCase and padded strap for Leica M11, M EV1 | Limited EDITION
Precio regular
$799.00
Precio de venta
$799.00
Precio regular
Vendido
FREE DOMESTIC SHIPPING ON ORDERS $49+
FREE WORLDWIDE SHIPPING ON ORDERS $299+
LOCAL PICK UP - EMAIL US TO FOR DATE & TIME
Local Pickup Available. Email US to arrange a date & time at store@owlkrown.com
One colour story, start to finish
Five pieces in the same OxBlood. The FlexCase in full grain Tuscan leather, the Slacker Padded Strap, both Shutter Toppers at 7.25 mm and 12 mm, and the EDC Keychain Tool in Silver Chrome. The case protects the camera, the strap carries it, the toppers give your finger a cleaner point of contact, and the tool keeps the small adjustments close.
Built for the Leica M11 and M EV1, on a precision machined aluminum plate. 78 grams complete, with a concealed Arca profile, an AirTag bay and full access to the battery, the card and the USB-C port without lifting the camera out.
- Fits. Leica M11, Leica M EV1. The plate is machined to those two bodies.
- Case weight. 78 grams, 2.8 ounces, complete with the aluminum plate.
- Case size. 5 5/8 inches long, 1 1/2 inches wide, 2 3/4 inches high. 143 by 38 by 70 mm.
- Shutter Toppers. Two, at 7.25 mm and 12 mm, in hard anodized OxBlood aluminum.
- Strap. Slacker Padded, full grain OxBlood leather, in the length you choose at checkout.
- Plate. Precision machined aluminum, OxBlood, with a concealed Arca profile, an AirTag bay, dual quarter twenty threads and an anti skid base.
- Threads. Two, 1/4 inch by 20.
- Access. Battery, SD card and USB-C, all reachable with the case on.
- Interior. Fully lined and padded. The finish of the camera never meets bare metal or bare leather.
- Production. Limited edition, very small batches. Excluded from sitewide promotions.
- Full grain Tuscan leather. Sourced from a tannery in Tuscany, Italy. No synthetic coating, and no two hides exactly the same.
- Structured, not stiff. A rigid internal structure keeps the case from going soft at the edges, and the leather molds to the body over time.
- Lined and padded inside. Every contact point is covered, so the Leica body never rests against bare metal or bare leather.
- Machined aluminum plate. Hard anodized OxBlood. The colour sits inside the anodized layer rather than on top of it.
- Slacker Padded Strap. Handmade in full grain OxBlood leather, with a padded section that spreads the load across the neck or shoulder.
- Shutter Toppers. Aircraft grade aluminum, hard anodized OxBlood, in both sizes.
- Made in Miami. Cut, machined and finished in our own shop.
- The colourDeep OxBlood across the case, the strap and both toppers, with the keychain tool in Silver Chrome to answer the hardware on the camera.
- A day of carrying it78 grams on the camera, lined and padded, and a padded strap section that carries the weight across the neck rather than a cord cutting into it.
- Straight onto the tripodThe Arca profile is machined into the plate and sits flush, so the head takes the camera with the case on and the strap still attached.
- Knowing where it isTrack your camera with an AirTag, concealed inside the plate. Access it anytime with the included EDC Keychain Tool. AirTag not included.
- FlexCase. One, in deep OxBlood leather on the OxBlood aluminum plate, for the Leica M11 and M EV1.
- Slacker Padded Strap. One, in OxBlood leather, in the length you choose.
- Shutter Topper, 7.25 mm. Low profile soft release for smaller threaded shutter buttons.
- Shutter Topper, 12 mm. Standard soft release size for compatible Leica M bodies.
- EDC Keychain Tool. Silver Chrome. Opens the AirTag compartment in the plate and handles quick adjustments in the field.
- AirTag. Not included. What we machine is the compartment it drops into.
- Leica M11 and M EV1. The FlexCase plate is machined to those two bodies.
- Not the M11 D. That body needs its own plate, because the plate is machined to the body it sits under.
- The strap fits any camera. Length is chosen at checkout, so the same strap moves to a second body.
- Shutter Toppers. Both sizes are included, so the set covers compatible threaded shutter buttons either way.
- The case stays on. Battery, SD card and USB-C are all reachable without taking the camera out of the leather.
- Two quarter twenty threads. For a plate, a grip, a cage or a strap anchor.
- Let it dry on its own. If it gets wet, dry it away from direct heat. A radiator will stiffen leather permanently.
- Cleaning. A dry cloth for dust, a barely damp one for anything else, then let it dry flat.
- Conditioner. Sparingly, colourless, and never on the edges.
- The plate and the toppers. A dry or barely damp cloth. No solvents, no abrasive paste: the colour lives inside the anodized layer.
- The patina is the point. The leather darkens and marks where your hand sits. That is the material working, not the set wearing out.
- How big is the case, and what does it weigh?5 5/8 inches long, 1 1/2 inches wide, 2 3/4 inches high. 143 by 38 by 70 mm. 78 grams, 2.8 ounces, complete with the plate.
- Do I have to take it off to change the battery or the card?No. The base plate stays on and the battery, the SD card and the USB-C port are all reachable with the case fitted.
- Why two Shutter Toppers?Threaded shutter buttons are not all the same. Both sizes ship in the set so you are not guessing before it arrives.
- Will my set look exactly like the photographs?Close, not identical. Colour tone and texture vary slightly from piece to piece, because the material is organic and no two hides finish the same.
- Does it fit the M11 D?No. That body needs its own plate.
Made in Miami, by photographers, for photographers. Produced in limited batches and excluded from any sitewide promotion.
