M.O.A.K. Mother of All Kits for Leica M10 & M10-D - Stealth (Bundle & Save 10%)
FREE DOMESTIC SHIPPING ON ORDERS $249+
FREE WORLDWIDE SHIPPING ON ORDERS $249+
LOCAL PICK UP - EMAIL US TO FOR DATE & TIME
Local Pickup Available. Email US to arrange a date & time at store@owlkrown.com
Secure, grip, carry, protect, finish and see.
The M.O.A.K., Mother of All Kits, is the full Owlkrown system for the Leica M10 and M10-D in one box. The FlexGrip, the HotGrip, the TrailFlex strap, the body cap, the M-EyeKup and the Shutter Topper, matched in one finish and ready to go on the camera.
Every metal part is Black Chrome and the TrailFlex comes in Stealth, so the whole kit disappears into a black M10 and leaves nothing on the camera that catches the eye. Choose your camera, then pick the Slim or the Regular M-EyeKup.
Bundle and save 10%.
FlexGrip for Leica M10 or M10-D.
Replaces the factory baseplate. A magnetic door opens over the battery and card with the plate still on, the Arca profile runs all the way around, and a hidden compartment holds an AirTag. Our solid grip on the front fills the hand. It comes with the EDC Keychain Tool.
HotGrip, with the Passthrough Hot Shoe Adapter.
A thumb grip that slides into the hot shoe and gives the right hand somewhere to rest, so the camera sits steady in one hand. The adapter comes with it: attach it to a manual flash, slide it into the base of the HotGrip, and it locks in with a solid click.
TrailFlex Adjustable Camera Strap, Stealth.
Sets its length in seconds, from shoulder carry to cross-body, so the camera stays where you want it. All black, to match the hardware.
Weather-Sealed M Body Cap.
Machined from a single aluminum rod, sealed against dust and moisture, with knurled edges that do not slip.
M-EyeKup (14mm).
Cuts stray and peripheral light so you stay locked into the frame in bright conditions. The Slim keeps the lowest profile. The Regular gives the most shade.
Shutter Topper (12mm).
Hard-anodized 6061-T6 aluminum for a smooth, tactile press. It threads on by hand, no tools.
EDC Keychain Tool.
Comes with the FlexGrip. Flat, foldable 4mm hex driver that doubles as a box opener. It opens the FlexGrip's AirTag compartment. Silver Chrome.
The HotGrip works with manual mode flashes with a center pin. It is not compatible with TTL, HSS, Visoflex or multi-pin electronic accessories. Some models fit but only work in manual mode.
Made in Miami.
- FlexGrip for Leica M10 or M10-D, Black Chrome, with all the hardware to mount it.
- EDC Keychain Tool, Silver Chrome, included with the FlexGrip.
- HotGrip, Black Chrome.
- Passthrough Hot Shoe Adapter, included with the HotGrip.
- TrailFlex Adjustable Camera Strap, Stealth.
- Weather-Sealed M Body Cap, Black Chrome.
- M-EyeKup (14mm), Black Chrome, Slim or Regular.
- Shutter Topper (12mm), Black Chrome.
Choose the FlexGrip for your body.
- Leica M10: fits the M10, M10-P, M10-R and M10 Monochrom.
- Leica M10-D: the M10-D has its own FlexGrip, in Black Chrome.
- The M-EyeKup is the 14mm thread for the M10 eyepiece.
- Special editions follow their base model.
- Wipe the metal parts with a soft, dry cloth. For heavier grime, use a slightly damp cloth and dry it after.
- Skip solvents and abrasive pastes. The anodized layer is the finish, and once it is cut through it does not grow back.
- Keep the FlexGrip door gasket and the body cap seal clean. A wiped gasket seals and a gritty one does not.
- Rinse the strap in cool water if it picks up salt or grit, and let it air dry.
Made in Miami by photographers, for photographers.
- Slim or Regular M-EyeKup?The Slim keeps the eyepiece low and close to the body. The Regular sits deeper and blocks the most side light.
- Will Black Chrome match my black M10?It is built to. The anodized black sits with the camera's own finish rather than against it. It is an anodized layer, not a paint, so it will not chip off.
- Which cameras does it fit?Choose Leica M10 for the M10, M10-P, M10-R and M10 Monochrom. Choose Leica M10-D for the M10-D, which has its own FlexGrip.
- Do I have to take the FlexGrip off to change the battery?No. The magnetic door opens over the battery and card compartment with the plate still on.
- Does the HotGrip work with my flash?With manual mode flashes that use a center pin, through the Passthrough Hot Shoe Adapter that comes with it. It does not support TTL, HSS, Visoflex or multi-pin accessories.
- What do I need to install everything?Nothing you do not already have. The EDC Keychain Tool and all the mounting hardware are in the box.
- Is this kit offered in another finish?Yes. The same kit is made in OxBlood, with every metal part anodized OxBlood and the Black with Red Accent TrailFlex.
- Is this a Leica product?No. Owlkrown designs and machines these parts in Miami. They are independent accessories built for the M10, not made or sold by Leica.
Owlkrown is an independent designer and manufacturer. Our products are compatible with the cameras named, and are not manufactured, endorsed or sponsored by the camera brands referenced. All trademarks are the property of their respective owners.
