Colour tone and texture may vary slightly from piece to piece, as the material is organic and no two hides finish exactly the same.

• Fits. Leica M11, Leica M EV1.
• Plate. Aerospace grade 6061-T6 aluminum.
• Weight. 78 grams, 2.8 ounces, complete with the plate.
• Size. 5 5/8 inches long, 1 1/2 inches wide, 2 3/4 inches high. 143 by 38 by 70 mm.
• Tripod. Concealed Arca profile, flush at the bottom. The camera goes on a tripod without the case coming off.
• Threads. Two, 1/4 inch by 20.
• Tracking. AirTag bay machined into the plate, with its own keychain tool to open it. The tag itself is not included.
• Base. Anti skid treatment. You feel it the moment you set the camera on a flat surface.
• Access. Battery, SD card and USB-C, all reachable with the case on.
• Interior. Fully lined and padded. The finish of the camera never meets bare metal or bare leather.
• Production. Close to three days of machining and hand work go into each one, which is why only a handful leave the bench each month. Excluded from sitewide promotions.

• Full grain Italian leather. A saturated red with a smooth, even finish and dark stitching. Structured, never floppy, it molds to the camera body over time.
• Lined and padded inside. The finish of the camera never touches bare material.
• Made in Miami. Cut, machined and finished in our own shop.

• The colourRed that reads as red across a room and holds its depth indoors. It deepens where your hand sits rather than staying uniform.
• A day of carrying it78 grams under the camera, lined and padded, so the body never meets bare metal. Aluminum is the light one: the case adds protection without adding heft.
• On the tripod, then off againThe Arca profile is cut into the plate and sits flush, so the camera drops onto a head and comes back off without the case ever leaving it.
• Knowing where it isTrack your camera with an AirTag, concealed inside the plate. Access it anytime with the included EDC Keychain Tool. AirTag not included.

• FlexCase. One, in OxBlood with an aluminum base plate.
• EDC Keychain Tool. Opens the AirTag compartment in the plate.
• AirTag. Not included. What we machine is the compartment it drops into.

• Leica M11 and M EV1. Cut for those two bodies. The M11 D has its own FlexCase, because the plate is machined to the body it sits under.
• The case stays on. Battery, SD card and USB-C are all reachable without taking the camera out of the leather.
• Straight onto a tripod. The Arca profile is concealed in the base plate, so the head takes the camera with the case still fitted.
• Two quarter twenty threads. For a plate, a grip, a cage or a strap anchor.

• Let it dry on its own. If it gets wet, dry it away from direct heat. A radiator will stiffen leather permanently.
• Cleaning. A dry cloth for dust, a barely damp one for anything else, then let it dry flat.
• Conditioner. Sparingly, colourless, and never on the edges.
• The patina is the point. The leather darkens and marks where your hand sits. That is the material working, not the case wearing out.

• Do I have to take it off to change the battery or the card?No. The base plate stays on and the battery, the SD card and the USB-C port are all reachable with the case fitted.
• What is under the leather?Aerospace grade 6061-T6 aluminum, 78 grams complete.
• How big is it, and what does it weigh?5 5/8 inches long, 1 1/2 inches wide, 2 3/4 inches high. 143 by 38 by 70 mm. 78 grams, 2.8 ounces, complete with the plate.
• Does it work on a tripod without coming off?Yes. The Arca profile is cut into the plate itself.