FlexCase for Leica M11, M EV1 & M11 D
FREE DOMESTIC SHIPPING ON ORDERS $249+
FREE WORLDWIDE SHIPPING ON ORDERS $249+
LOCAL PICK UP - EMAIL US TO FOR DATE & TIME
The FlexCase, in the plate finish you choose
Full grain Italian leather in black, wrapped around a base plate machined in Miami for the Leica M11, the M EV1 and the M11 D. The plate is where the engineering lives: a concealed Arca profile, an AirTag bay, two quarter twenty threads and full access to the battery, the card and the USB-C port without lifting the camera out.
Five plate finishes. Silver Chrome, Black Chrome and OxBlood are machined from aerospace grade 6061-T6 aluminum and weigh 78 grams complete. Solid Brass and Black Patina are brass, at 186 grams, and they age with handling rather than staying uniform.
⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. Applies to the Solid Brass and Black Patina finishes.
Colour tone and texture may vary slightly from piece to piece, as the material is organic and no two hides finish exactly the same.
- Fits. Leica M11, Leica M EV1, Leica M11 D.
- Plate. Silver Chrome, Black Chrome and OxBlood in aerospace grade 6061-T6 aluminum. Solid Brass and Black Patina in brass.
- Weight. 78 grams with an aluminum plate, 186 grams with brass. 2.8 and 6.6 ounces, complete.
- Size. 5 5/8 inches long, 1 1/2 inches wide, 2 3/4 inches high. 143 by 38 by 70 mm.
- Tripod. Concealed Arca profile, flush at the bottom. The camera goes on a tripod without the case coming off.
- Threads. Two, 1/4 inch by 20.
- Tracking. AirTag bay machined into the plate, with its own keychain tool to open it. The tag itself is not included.
- Base. Anti skid treatment. You feel it the moment you set the camera on a flat surface.
- Access. Battery, SD card and USB-C, all reachable with the case on.
- Interior. Fully lined and padded. The finish of the camera never meets bare metal or bare leather.
- Production. Close to three days of machining and hand work go into each one, which is why only a handful leave the bench each month. Excluded from sitewide promotions.
- Full grain Italian leather. Black, with a pebbled grain. Structured, never floppy, it molds to the camera body over time and gets better the longer it is carried.
- Lined and padded inside. The finish of the camera never touches bare material.
- Made in Miami. Cut, machined and finished in our own shop.
- The colourBlack leather against the plate you chose. Silver Chrome draws a bright line along the base, Black Chrome disappears into the leather, OxBlood reads as a red edge, and brass warms as it ages.
- A day of carrying it78 grams on an aluminum plate, 186 on brass, lined and padded either way, so the camera never meets bare metal.
- On the tripod, then off againThe Arca profile is cut into the plate and sits flush, so the camera drops onto a head and comes back off without the case ever leaving it.
- Knowing where it isTrack your camera with an AirTag, concealed inside the plate. Access it anytime with the included EDC Keychain Tool. AirTag not included.
- FlexCase. One, in the leather and plate finish you chose.
- EDC Keychain Tool. Opens the AirTag compartment in the plate.
- AirTag. Not included. What we machine is the compartment it drops into.
- Leica M11, M EV1 and M11 D. Cut for those bodies, with the plate machined to the one you choose at checkout.
- The case stays on. Battery, SD card and USB-C are all reachable without taking the camera out of the leather.
- Straight onto a tripod. The Arca profile is concealed in the base plate, so the head takes the camera with the case still fitted.
- Two quarter twenty threads. For a plate, a grip, a cage or a strap anchor.
- Let it dry on its own. If it gets wet, dry it away from direct heat. A radiator will stiffen leather permanently.
- Cleaning. A dry cloth for dust, a barely damp one for anything else, then let it dry flat.
- Conditioner. Sparingly, colourless, and never on the edges.
- The patina is the point. The leather darkens and marks where your hand sits. That is the material working, not the case wearing out.
- Do I have to take it off to change the battery or the card?No. The base plate stays on and the battery, the SD card and the USB-C port are all reachable with the case fitted.
- What is under the leather?Aluminum in Silver Chrome, Black Chrome or OxBlood at 78 grams, or brass, solid or in a black patina, at 186 grams. Aluminum keeps the camera light. Brass adds weight low under the body and ages with handling.
- How big is it, and what does it weigh?5 5/8 inches long, 1 1/2 inches wide, 2 3/4 inches high. 143 by 38 by 70 mm. 78 grams with an aluminum plate, 186 grams with brass. 2.8 and 6.6 ounces, complete.
- Does it work on a tripod without coming off?Yes. The Arca profile is cut into the plate itself.
Produced in limited batches and excluded from any sitewide promotion.
FlexCase for Leica M11 & M-EV1
A leather case handmade in Miami, Florida. Built for the Leica M11 and M-EV1. Every detail engineered for real use. No shortcuts, no compromises.
The Leather
Full grain leather sourced from a tannery in Tuscany, Italy. Selected for texture, consistency, and tanning quality. Develops character with use. No PVC coating, no synthetic material. Every case carries its own section of hide. No two are identical.
The Structure
Rigid internal support layer built into the leather component. Maintains the shape of the case through real use. Never goes soft or flimsy at the edges over time.
Interior Lining and Padding
The case interior and plate are fully lined and padded. Every surface that contacts the camera is covered. The finish of your M11 never touches bare metal or bare leather.
The Plate
Machined from solid aluminum or brass. Inlaid Arca Profile concealed at the base. Flush, no protrusion, no added bulk. Direct tripod mounting without removing the case.
AirTag Compartment
Built directly into the plate. Accessed via a custom designed cap that requires removing the case to open. Because your investment should stay safe when your put your camera down.
EDC Keychain tool
4mm Hex - Flat head Driver.We know how frustrating it is fetching for the right screw driver size in the middle of a shoot.So, we designed this tool, foldable and compact to stay with you at all times. Works as a box opener.
Anti-Skid Base
Rubber points at the base. Camera does not slip. Surface it rests on does not get scratched.
Tripod Compatibility
Inlaid Arca Profile for Arca compatible heads. 2 x 1/4" 20 threads for screw-on tripods
UNOBSTRUCTED ACCESS
Full battery removal, SD card access, and USB-C port access without removing the case. No doors, no obstructions, no additional steps.
Arca Profile
Direct tripod mounting with built-in Arca
Profile compatibility while adding support that prevents the camera from tipping forward.
Sustainable Packaging
Recycled cardboard and organic ink. The Experience of the FlexCase begins at the moment you unbox it. The look, the feel the smell of leather. All senses at play.
Tested the Flexcase on a 2,600mile road trip. From dashboards in the sun to dusty back roads in high humidity the case protected my m11p. The leather build and metal bottom plate are a high quality high functioning addition to my kit. I particularly like how minimal the case is because I love the traditional M rangefinder ergonomics.
Thank you so much for sharing your experience, John! It means a lot to know your FlexCase performed so well throughout such a demanding 2,600-mile road trip. We designed it to protect your Leica while preserving the classic M ergonomics, so it’s wonderful to hear it delivered exactly that. Thank you for sharing the amazing photo and for your support!
A very well-made product... excellent finish, camera protection, and AirTag security... no complaints at all.
Thank you, Luiz, for taking the time to share your feedback! We’re delighted to hear you’re enjoying your FlexCase and that the finish, camera protection, and built in AirTag compartment have met your expectations. Every FlexCase is proudly handcrafted in Miami, and it’s rewarding to know the attention to detail is appreciated. Thank you for your support, and we wish you many great adventures with your Leica!
I can not say enough about these products. The best!
The team response with speed and care and the quality is unmatched. The leather case smells and feels great in your hands. Style and function perfectly designed. Must have. Keep up the amazing work guys!
Thank you so much for the kind words and for taking the time to share this, Jayvega! Hearing that you noticed not only the craftsmanship and feel of the leather, but also the care from our team truly means a lot to us. We put a great deal of attention into balancing function, materials, and design, so feedback like this makes it incredibly rewarding. Enjoy your FlexCase and thank you for being part of the Owlkrown community.
